+
  • PZ30低压封闭式照明箱.jpg

PZ30 low voltage enclosed lighting box

Category:

Integrated distribution box

PZ30 low voltage enclosed lighting box is suitable for single phase and three phase circuit with frequency of 50Hz, rated voltage of 500V and below, load current is not greater than 100A, for power lighting, motor control, overload, leakage and short circuit protection of the circuit, the box design is reasonable, small size, beautiful appearance, safe and reliable use,

Phone:

86-0551-62578999

Contact
Consult

Product Detail

Overview

PZ30 low-voltage enclosed lighting box is suitable for single-phase and three-phase circuits with a frequency of 50Hz, a rated voltage of 500V and below, and a load current of no more than 100A. It is used for power lighting, motor control, and circuit overload, leakage and short circuit protection. , The box is reasonable in design, small in size, beautiful in appearance, safe and reliable in use, and can be widely used in factories, buildings, residences, shopping malls and other places.

Implementation Standards

GB7251 "Low-voltage complete switchgear and control equipment, Part III: Special requirements for low-voltage complete switchgear and control equipment-distribution boards in places where non-professionals enter."

IEC60439——3 "{Voltage Switchgear and Control Equipment, Part 3: Special Requirements for Low-Voltage Switchgear and Control Equipment-Distribution Panels for Non-professionals to Enter the Site".

Product model and meaning

 

PZ30 Low Voltage Enclosed Lighting Box

 

Use conditional environment

1. The altitude does not exceed 2000m.

2. The ambient air temperature should not exceed 40°C and not be lower than -25°C.

3. The monthly average relative humidity of the air at +20°C is not more than 90.

4. No places with severe vibration and impact.

5. There is no explosion hazard place, and there is no gas and conductive dust in the medium that can corrode metals and damage insulation.

Structural Features

The shell material of PZ30 lighting distribution box is made of 1.0mm thick high-quality steel plate. The shell is treated by high-voltage electrostatic spraying, and it is equipped with a plastic transparent cover. .

1. Factory standard of modular structure; combination system.

2. The design of each cabinet is novel and beautiful, and it integrates standard and serialization.

3. The three-phase lighting box can be used alone, single-stage and multi-stage, and the leakage can be combined arbitrarily.

4. Rated current ≤1 00A, enclosure protection level up to P3X.

5. The ultra-thin structure is suitable for the installation of light-weight structural walls and wall hanging installations.

6. Safe and reliable single-phase three-phase comb-shaped busbar connection, and busbar insulation protection cover to make it have higher safety performance and better thermal stability.

Appearance and installation dimensions

 

PZ30 Low Voltage Enclosed Lighting Box

 

Order Notes

Please specify when ordering:

1. Model number;

2. Number of loops;

3. Installation method (exposed or concealed);

4. Cabinet color.

Keywords: high voltage | low ark | box complete sets of equipment

Online message

Submit